Help
Add this page to your book
Show book (0 pages)
Suggest pagesCoaxial
 |
This article does not cite any references or sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (December 2009) |
In geometry, coaxial means that two or more forms share a common axis; it is the three-dimensional linear analogue of concentric.
Coaxial cable, as a common example, has a wire conductor in the centre (D) a circumferential outer conductor (B) and an insulating medium called the dielectric (C) separating these two conductors. The outer conductor is usually sheathed in a protective PVC outer jacket (A).
The dimension and material of the conductors and insulation determine the cables characteristic impedance and attenuation at various frequencies.
In loudspeaker design, coaxial refers to a loudspeaker system in which the individual driver units radiate sound from the same point or axis. This is achieved by placing the high-frequency unit in the centre of the low-frequency driver, rather than having the two radiating from separate spaces. Altec Lansing pioneered the design with their 601 and 604 duplex (Altec's term for coaxial) drivers in the 1940s and Tannoy further popularized the idea with their dual-concentric design several years later. The concept has been used by a number of other loudspeaker companies such as KEF, Jensen, Technics, Thiel and Geithain, but it still remains a minority exercise due to technical and budgetary considerations despite its theoretical advantages.
See also
 |
Look up coaxial in Paleochora Dictionary, the free dictionary. |
|
||||||||